Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service

Expert ATE MK100 ABS pump repair for Jaguar E-Pace X540 — plug and play, 48hr turnaround, 2-year warranty and free tracked UK postage both ways.

£139.99

Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service
Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service - Image 2
Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service - Image 3
Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service - Image 4
Jaguar E-Pace X540 ATE MK100 ABS Pump Repair Service - Image 5
Blackstone Auto Electronics logo – Jaguar E-Pace X540 ATE MK100 ABS pump repair

ATE MK100 ABS Pump Repair
Jaguar E-Pace X540
No diagnostic charges. No hidden costs. No surprises.
2-Year
Warranty
48-Hour
Workshop Turnaround
Free Tracked
Postage Both Ways
This is a repair service
You send us your original Jaguar E-Pace X540 ATE MK100 ABS pump; we repair the covered internal hydraulic fault, fully test the unit, then return the same pump ready to refit.
About this repair

Specialist Jaguar E-Pace X540 ATE MK100 ABS Pump Repair

Jaguar E-Pace X540 ATE MK100 ABS pump repair from Blackstone covers the internal hydraulic fault that can cause one or more wheels to lock, bind or fail to release correctly after braking. This listing is specifically for Jaguar E-Pace X540 vehicles fitted with the ATE MK100, also known as the Continental MK100 or Teves MK100.

We inspect your original ABS pump, repair the covered internal fault and test the unit using dedicated ABS bench equipment before return. This single service covers both the standard ATE MK100 and the 46-pin stability-control variant. Because we return your original unit, no coding, programming or calibration is normally required after refitting.

Before booking

Common Symptoms Associated with This Fault

  • One or more wheels locking or binding under braking
  • The vehicle pulling to one side when braking
  • Brakes failing to release fully after the pedal is released
  • ABS, ESP, ESC, VSA, DSC or stability-control warning lights illuminated
  • Uneven or inconsistent braking performance
  • Fault code U3000 stored
  • Obvious braking problems despite no warning lights or stored fault codes
Important: The ATE MK100 can fail without illuminating a warning light or storing a fault code. Wheel locking or binding may appear suddenly, so a clean diagnostic scan does not rule out an internal MK100 hydraulic fault.
Compatibility check

Is This Repair Right for Your Vehicle?

Choose this Jaguar E-Pace X540 ATE MK100 ABS pump repair when the fault is internal to the MK100 pump itself. Before booking, check each point below:

  • One or more wheels bind, lock or fail to release correctly during or after braking.
  • The vehicle may pull to one side or show inconsistent braking performance.
  • ABS or stability-control warning lights may be on, but the fault can also occur without any warning light or stored code.
  • The rest of the braking system — including pads, discs, calipers and brake lines — has been checked and is in serviceable condition.
  • The unit is an ATE, Continental or Teves MK100, including the standard or 46-pin stability-control version.

Not certain whether your Jaguar E-Pace X540 is fitted with an ATE MK100? Send us the complete part number, a clear photograph of the ABS pump and a description of the symptoms. We will help confirm suitability before you order.

Simple process. Fast turnaround. Fully tracked.

How to Get Your Unit Repaired

Book online

Select Book Repair and complete checkout securely on our website.

Pack and send your unit

Remove the ABS pump from the vehicle, protect the electrical connector and hydraulic ports, then package the complete unit securely using suitable protective material and the prepaid Royal Mail label. You do not need to drain every trace of brake fluid; a small residual amount inside the pump is normal.

We repair and fully test it

We inspect the ATE MK100, repair the covered internal hydraulic fault and test the unit using dedicated ABS bench equipment. The 48-hour workshop turnaround begins when the pump reaches our workshop, excluding weekends and bank holidays.

We return it fast

Your original ABS pump is carefully packed and returned by Royal Mail Tracked 24. Simply refit the same unit — no coding, programming or calibration is normally required.
Please use the label we provide so your parcel remains fully tracked and qualifies for free postage.
Non-negotiable, every time

The Blackstone Standard

The Customer Comes First

Clear communication and a repair experience built around getting you back on the road.

2-Year Warranty

Included as standard on every repair we carry out, subject to our warranty terms.

48-Hour Workshop Turnaround

Your unit is repaired, bench tested and dispatched within 48 hours of being received at our workshop, excluding weekends and bank holidays. Most units are dispatched sooner.

Free Postage Both Ways

A prepaid Royal Mail Tracked 24 label is supplied for sending the unit to us, and return postage is included.

No Repair, No Fee

If we cannot repair your unit, we will contact you and arrange a full refund.

Specialist Technicians

Dedicated ABS bench-testing equipment, hydraulic diagnostics, component-level expertise and proven repair methods.

Original Unit Preserved

Your original ABS pump is repaired and returned, avoiding the coding and compatibility complications associated with a replacement unit.

UK-Based Workshop

Repair, testing and dispatch are completed in our UK workshop from start to finish.
Specific vehicle listing

Jaguar E-Pace X540 Compatibility

This listing is specifically for Jaguar E-Pace X540 vehicles fitted with the ATE MK100 ABS pump. The ATE MK100 is also known as the Continental MK100 or Teves MK100, and this repair covers both the standard unit and the 46-pin stability-control variant where fitted.

The MK100 was not fitted to every model year, engine or specification. Before ordering, please check the identification on your original ABS pump. If you are unsure, send us the complete part number and a clear photograph of the unit and we will confirm suitability before you book the repair.

Check your unit

ATE MK100 ABS Pump Part Number Check

ATE and Continental part numbers can vary across Jaguar E-Pace X540 model years, engines and specifications. The important check for this listing is that the original unit you are sending is an ATE, Continental or Teves MK100.

If you would like us to confirm the unit before you order, send us the complete part number from the ABS pump together with a clear photograph. We will check it against the repair service and confirm whether it is suitable.

Useful information

Frequently Asked Questions

Does the ATE MK100 need coding or programming after the repair?
No. This is a plug-and-play repair of your original ABS pump. Once refitted, the same unit normally works without coding, programming or calibration.
Is every Jaguar E-Pace X540 fitted with an ATE MK100?
No. Fitment can vary by model year, engine and specification. This listing is for Jaguar E-Pace X540 vehicles that are fitted with the ATE MK100, including the standard pump and the 46-pin stability-control variant. If you are unsure, send us the part number and a clear photograph before ordering.
Can the MK100 fail without a warning light or fault code?
Yes. The internal hydraulic fault can cause wheel locking, binding or poor brake release without illuminating a warning light or storing a diagnostic code. A clean scan does not rule out the fault.
Do I need to drain the brake fluid before sending the pump?
No. You do not need to drain every trace of brake fluid from the ATE MK100. A small residual amount inside the pump body is normal. Protect the ports and package the unit securely.
Can I drive the vehicle while the ABS pump is faulty?
We strongly advise against driving the vehicle while the ABS pump is faulty because braking performance may be significantly compromised.
How long does the repair take?
We start the 48-hour workshop turnaround when the ABS pump reaches our workshop. The timeframe excludes weekends and bank holidays. In many cases, we finish sooner.
What happens if the unit cannot be repaired?
If we cannot repair the unit, we contact you and arrange a full refund under our No Repair, No Fee commitment. Every completed repair includes a 2-year warranty, subject to our warranty terms.
I am not sure whether my Jaguar E-Pace X540 has an ATE MK100 — can you help?
Yes. Send us the complete part number and a clear photograph of the ABS pump fitted to your Jaguar E-Pace X540 and we will confirm whether it is an ATE MK100 covered by this repair before you order.

SKU: ABS12